Fertilizing and Watering
|
Subject: Soil Test Advice From Experts ( Chemists )?
|
|
From
|
Location
|
Message
|
Date Posted
|
NP |
Pataskala,OH
|
OM- 7.3
P1 phosphorus- 230 ppm
P2 phosphorus- 231 ppm
Potassium- 512 ppm
Magnesium- 657 ppm
Calcium- 2677 ppm
PH 7.4
C.E.C- 20.2
Base Saturation-----------------------------------
K- 6.5
Mg- 27.1
Ca- 66.4
H- 0.0
|
4/26/2010 6:17:07 PM
|
Tremor |
Ctpumpkin@optonline.net
|
You need to act fast so Gypsum at 100 lbs/M or better yet use Solucal & gypsum 50/50.
SOP 0-0-50 20 LBS/M.
Leave the pH alone for now.
Why not last fall?
|
4/27/2010 5:43:17 AM
|
NP |
Pataskala,OH
|
100lbs gypsum for 500 sq ft? Solucal sounds like the way I need to go.
I was already planning to add 10 lbs of SOP this spring for a 500 sq ft plant.
|
4/27/2010 6:16:18 PM
|
garysand |
San Jose garysand@pacbell.net
|
I think he is saying 100lbs per 1,000'sq M=1000
|
4/29/2010 4:57:44 PM
|
Zander |
Buffalo, new York, USA
|
m=1000
|
4/29/2010 5:47:29 PM
|
swaintech |
churchville, ny
|
I'm still trying to figure these soil tests out - Is Nic adding the gypsum (calcium sulfate) because his calcium is low (if 2677 ppm is low) or is it because his pH is high (7.4) - although I thought I read that gypsum does not effect pH.
|
4/29/2010 7:25:45 PM
|
NP |
Pataskala,OH
|
So I should add Potash to lower potash ? Huh. I got some gypsum will add at last till Saturday morning.
|
4/29/2010 8:39:03 PM
|
NP |
Pataskala,OH
|
The results of my test seem weird. I added 10lbs of sop and some manure last fall and my potassium sky rocketed from 100 to 512.
|
4/29/2010 8:41:00 PM
|
Tremor |
Ctpumpkin@optonline.net
|
M=1000 SQ FT so 20#/M is 10 lbs/500 sq ft.
Solucal is quicker than regular gypsum. Use it if you can.
Is this a newly acquired site Nic?
At the rate AGs feed, CA & K are good bets even if the test report doesn't indicate a deficiency.
|
4/29/2010 8:57:15 PM
|
NP |
Pataskala,OH
|
This is a new spot I added a lot of amendments last fall so it is not like I am just now getting the patch ready. I thought I would just have to do a few minor changes. I looked At past data from other growers I thought over 500 ppm on potassium was too high.
|
4/29/2010 9:55:53 PM
|
Tremor |
Ctpumpkin@optonline.net
|
500 ppm K is high but look at your MG. You could skip the K but SOP is gentle. As the season goes these cation elements will slide into balance. AGs are heavy CA & K magnets.
|
4/29/2010 11:13:27 PM
|
Total Posts: 11 |
Current Server Time: 11/25/2024 9:33:50 AM |